News

2 weeks ago

Z3X-Team

Easy-JTAG Plus Released!!!! the fastest and innovative box in the gsm world.

Dear Friends!

Thank you for showing the interest in the Easy-JTAG Plus during the last months before the release.

Easy-JTAG is the most wanted and powerful box in the gsm world, but the evolution of technology and memory chips forced us to start developing the easy-jtag plus.

Today we are proud to present you a so long awaited Upgraded version of Easy-JTAG - the fastest and innovative, all in one solution for phone repair, data recovery, digital forensics and much more technologies Easy JTAG Plus Box (Device Programmer). The developing of Easy-JTAG 2 has taken 3 years of researching and 1 year of testing.

Current Easy JTAG Box hardware due to its limitations was reworked from scratch to gain more power and flexibility. The result is the amazing high speed flashing interface. Its performance is the highest of all similar solutions at the market at the moment.

Upgraded version features ultra fast data transfer, has possibility of increasing functionality in the future: hardware of the new box is ready to support new protocols like UFS* and NAND*.

The main features of a new hardware are:

- Updated Host MCU SAM3X8E vs LPC1768 in old box.
- Updated HIGH SPEED FPGA SPARTAN6 vs SPARTAN3 in old box
- Updated POWER MANAGEMENT subsystem – Full Digital PWM with ADC control.
- Added microUSB Connector if additional power required.
- Added VCC and VCCQ switch with overcurrent protection.
- Updated USB device interface: USB 2.0 480 Mbps (High Speed)
- Integrated ISP engine: Z3X High Power Pro Engine (4Mb/s )
- ISP Support 1 and 4 bit* connection now.
- Added eMMC 8 bit high speed interface up to 42Mhz
- Integrated NAND* engine: NFC with 4 Kbyte RAM buffer and ECC
- Integrated M-PHY* interface.
- Integrated SPI engine: up to 21 MHz clock for popular SPI Memory Flash IC
- Integrated Self Test Core that exclude 90% faults in production.
- Integrated CCID Card Reader for Z3X Software Use

The main benefits of a new hardware are:

- Box to Host PC speed increased up to 40MB/sec
- JTAG Interface speed increased 20%
- eMMC 1 Bit ISP Speed increased up to 4MB/sec
- eMMC 4 Bit ISP Speed increased up to 12MB/sec (eMMC 5.0+) **
- eMMC 4 Bit Speed up to 18MB/sec
- eMMC 8 Bit Speed up to 28MB/sec ( eMMC 5.0+ )
- Compatibility with 99 host PC systems and OS’s
- Compatibility with old Easy JTAG gen. 1 ISP adapters (1bit)
- Adapter-less ISP (all stuff inside the box)
- Compatibility with all market popular eMMC sockets (with supplied adapters)
- True Plug and Play for modern Windows OS (8, 8.1, 10)
- Full Support for legacy OS like Windows XP

The second great news for today is that you can see inside Easy JTAG Plus Box package *** 😉
Combining the top quality materials with the best engineering and elegantly designed hardware for the powerful Z3X eMMC Socket.
Now every full box set will be equipped with this amazing a must have thing!

Our eMMC socket is:

- Made from the high quality materials
- Have 10000 cycle of lifetime performance in your service center
- Wide range of eMMC IC supported by: BGA153/169, BGA162/186, BGA221, BGA529
- High-speed up to 40 MB per second over 8 bit bus.
- EMI Resistant Design, Low Noise Components.
- Integrated power logic! No need of the additional power!
- Surge Protection - smart fuse driven (0.5A threshold).
- Easy to operate, just turn and click.
- Like any other Z3X crafted thing - the best solution at the market 😉

Box Sets Description:

------------------------------------------------

Full Box Set :
- Z3X EMMC Socket (BGA153/169, BGA162/186, BGA221, BGA529)
- Easy-JTAG Plus Box Hardware
- Z3X Smart Card with EasyJTAG PLUS ACTIVATION
- USB A-B cable
- Adapters set 5 pcs (JTAG, ISP 1BIT, ISP 4BIT, U-SOCKET, E-SOCKET)
- 1-Year guaranteed free support access

Lite Box Set :
- Easy-JTAG Plus Box Hardware
- Z3X Smart Card with EasyJTAG PLUS ACTIVATION
- USB A-B cable
- Adapters set 5 pcs (JTAG, ISP 1BIT, ISP 4BIT, U-SOCKET, E-SOCKET)
- 1-Year guaranteed free support access

Full Upgrade Box Set :
- Z3X EMMC Socket (BGA153/169, BGA162/186, BGA221, BGA529)
- Easy-JTAG Plus Box Hardware
- Free Activation for new users (6 months old boxes) *
- USB A-B cable
- Adapters set 5 pcs (JTAG, ISP 1BIT, ISP 4BIT, U-SOCKET, E-SOCKET)
- 1-Year guaranteed free support access
- Smard Card is not included. Need to use the card from an old box )

Lite Upgrade Box Set :
- Easy-JTAG Plus Box Hardware
- Free Activation for new users (6 months old boxes) *
- USB A-B cable
- Adapters set 5 pcs (JTAG, ISP 1BIT, ISP 4BIT, U-SOCKET, E-SOCKET)
- 1-Year guaranteed free support access
- Smard Card is not included. Need to use the card from an old box )

------------------------------------------------

From tomorrow boxes will start depart to official resellers.
So from tomorrow you can preorder/oder boxes.

------------------------------------------------------------------------------------------------
The list of resellers is here: z3x-team.com/where-to-buy/
Forum Easy-Jtag - forum.gsmhosting.com/vbb/f672/
Facebook Easy-JTAG www.facebook.com/easyjtag/
Facebook Z3X-Team www.facebook.com/Z3XTeamPublic/
------------------------------------------------------------------------------------------------

*remark : UFS and NAND protocols due to high speed connection rates requires special sockets and will be released in the future software and firmware releases.
** 4-BIT ISP technology is currently under testing and will be added in the future firmwares.
*** Socket included in Full sets only.
**** Upgrade procedure requires entering serial of upgraded card in a special database by the reseller.
***** Due to the onrush of technology and efforts to meet every customer's demands, the supplier retains the right to change some positions in the list of cables and accessories coming together with the product. Therefore, the package content presented above is rather tentative. More details on the matter can be obtained from our authorised resellers.

Support forum thread forum.gsmhosting.com/vbb/f672/easy-jtag-plus-released-fastest-innovative-box-gsm-world-2294493/

#NEWS
... See MoreSee Less

 

Comment on Facebook

😥

what the full feature of jtag plus? is this two in one box? if we buy this box,can we use z3x pro soft and jtag soft also? z3x jtag plus can repair dead boot phone via usb?

good sapot box

sir i have all this tools i need n7102 note 2 dual emmc pin out on pcb

There is no reseller in my country every reseller refused they dont have easy jtag they said.

not good support

2 weeks ago

Z3X-Team

Samsung Tool 30.0 PRO released. New method for read codes even knox 1

Added:

addition support SM-J326az (New method Read codes via sever with any knox) - first in the world
addition support SM-J327a (New method Read codes via sever with any knox)- first in the world
addition support SM-J327az (New method Read codes via sever with any knox)- first in the world
addition support SM-J330f (New method Read codes via sever with any knox)- first in the world
addition support SM-J330fn (New method Read codes via sever with any knox)- first in the world
addition support SM-J330g (New method Read codes via sever with any knox)- first in the world
addition support SM-J330I (New method Read codes via sever with any knox)- first in the world
addition support SM-J330n (New method Read codes via sever with any knox)- first in the world

Fixed:
- Read codes on some G920x, g925x (error 4)
- Fixed J727p unlock.

P.S. Black FRIDAY Promo extended for 1 day more.

#NEWS
... See MoreSee Less

 

Comment on Facebook

great!

Greaat update team

J727p gives me an error when triying to unlock i already downgraded modem

use forum for post tech things

please support New method for read codes even knox 1 for SM-G950F

Hi'sir Please add G955 repair imei

give me one cliek root

thnks team

why my z3x box not work since update to version 30.0

I have card error in z3x shell since update

Not thru

Not thru

j330f not thru

Hi, I have the z3x and I have the samsung pack. I would like to know how to activate the LG pack

+ View more comments

2 weeks ago

Z3X-Team

Shell updated to version 4.8.1

Fixed:
* Opening with Settings tab instead of Models tab

Added
* Drivers for upcoming Jtag Plus

#NEWS
... See MoreSee Less

3 weeks ago

Z3X-Team

Z3X-BOX Samsung PRO Update. Samsung Tool 29.9 Update. Read codes without server added

Samsung Tool PRO 29.9 Lot Phones added for read codes direct without server/without root. First in the world.

Today we present second part of BIG Update for Shannon phones.
Direct READ codes DIAG. NO server. No root. No credits.

LIST OF PHONES: (Instant DIRECT READ CODES without server/credits) - First in the world

SM-A310F*, SM-A310FD*, SM-A310M*, SM-A310MD*, SM-A310N0*, SM-A310Y*
SM-A5108*, SM-A510F*, SM-A510FD*, SM-A510K*, SM-A510L*, SM-A510M*, SM-A510MD*, SM-A510S*,SM-A510Y*
SM-A7108*, SM-A710F*, SM-A710FD*, SM-A710K*, SM-A710L*, SM-A710M*, SM-A710S*, SM-A710Y*
SM-A800F, SM-A800i, SM-A800IZ, SM-A800J, SM-A800S, SM-A800YZ
SM-G150N0, SM-G150NK, SM-G150NL, SM-G150NS, SM-G155S,
SM-G389F*,
SM-G5500, SM-G550F, SM-G550FY, SM-G550T2,
SM-G600F*, SM-G610F*,
SM-G890A, SM-G903F, SM-G903M, SM-G903W, SM-G920A, SM-G920AZ, SM-G920F, SM-G920FD
SM-G920FQ, SM-G920I, SM-G920K, SM-G920L, SM-G920S, SM-G920T, SM-G920T1, SM-G920W8,
SM-G925A, SM-G925F, SM-G925FQ, SM-G925I, SM-G925K, SM-G925L, SM-G925S, SM-G925T, SM-G925W8
SM-G9287, SM-G9287c, SM-G828A, SM-G828C, SM-G828F, SM-G828G, SM-G928I, SM-G928K, SM-G928L, SM-G928N0
SM-G928S, SM-G928T, SM-G928W8
SM-G930F*, SM-G930FD*, SM-G930K*, SM-G930L*, SM-G930S*, SM-G930W8*
SM-G935F*, SM-G935FD*, SM-G935K*, SM-G935L*, SM-G935S*, SM-G935W8*
SM-J120A, J120AZ, SM-J120F, SM-J120FN, SM-J120G, SM-J120M, SM-J120W*, SM-J120ZN
SM-J200BT, SM-J200F, SM-J200G, SM-J200GU, SM-J200M, SM-J200Y,
SM-J320I*, SM-J320AZ*, SM-J320W8*, SM-J321AZ*,
SM-J700F, SM-J700H, SM-J700M, SM-J700T, SM-J700T1,
SM-J7108*, SM-J710F*, SM-J710FN*, SM-J710FQ*, SM-J710GN*, SM-J710K*, SM-J710MN*,
SM-N916K, SM-N916L, SM-N916S,
SM-N9208, SM-N920A, SM-N920C, SM-N920F, SM-N920G, SM-N920I, SM-N920K, SM-N920L, SM-N920S, SM-N920T, SM-N920W8,
SM-N930F, SM-N930FD, SM-N930K, SM-N930L, SM-N930S,
SM-N930F, SM-N935K, SM-N935L, SM-N935S,
SM-T585*,SM-T585C*, SM-T585N0*, SM-T587*, SM-T677, SM-T677A, SM-T677NK, SM-T677NL,
SM-T715, SM-T715C, SM-T715N0, SM-T715Y,
SM-T815C, SM-T815N0, SM-T815Y, SM-T817P, SM-T817T, SM-T817W,
SM-T375L*, SM-T375S*, SM-T3777*, SM-T377V*, SM-T377W*, SM-T378L*, SM-T378S*, scv32

Important. Phones with *, do not work with this solution if knox - 1.
Please don't ask why solution not work for some phone, just check knox in download mode, thats all.

Also for new SHANNON added addition function: (Read CERT DIAG) if knox - 0. No root need!. - First in the world

Addition function added for phones:

SM-A320F, SM-A320FL, SM-A320Y
SM-A520F, SM-A520K, SM-A520L, SM-A520S, SM-A520W
SM-A720F, SM-A720S
SM-G390F, SM-G390Y, SM-G390W
SM-G570F , SM-G570M, SM-G570Y
SM-G610K, SM-G610L, SM-G610M, SM-G610S, SM-G610Y
SM-G950F, SM-G950N, SM-G955F, SM-G955N
SM-J326AZ, SM-J327A, SM-J327AZ, SM-J327U, SM-J327W, SM-J330F,
SM-J330FN, SM-J330G, SM-J330L, SM-J330N
SM-j530F, SM-j530FM, SM-G530G, SM-G530GM, SM- G530K, SM-G530L, SM- G530S, SM-G530Y, SM-G530M
SM-J701F, SM-J701M, SM-J701MT,
SM-J727A, SM-J727AZ, SM-J727S, SM-J727U, SM-J730F, SM-J730FM, SM-J730G, SM-J730GM, SM-J730K,
SM-N950F, SM-N950N,
SM-P585, SM-P585N. SM-P585N0, SM-P585Y, SM-P587, SM-P588C,
SM-T395, SM-T395N

#NEWS
... See MoreSee Less

 

Comment on Facebook

Jos kandos untuk z3x. cara upnya gmn ya?kmrn br beli boxnya setelah dinstal katanya card not pound Ini solusinya gmn ya gan?🙏

Load more


free counters


User Agreement
2005-2017 (c) z3x-team