[ EASY-JTAG PLUS ACTIVATION ]

DESCRIPTION:

Today we are proud to present, a long awaited all in one solution, your new product Easy JTAG Plus – universal service tool for phone boot and chip firmware repair, data recovery, and digital forensics.

This is a very convenient, all in one solution supporting eMMC, Jtag, ISP, SPI, NAND protocols. Providing the possibility of eMMC firmware and boot repair, data recovery, SPI memory programming, and more others features.

In addition, we developed a powerful eMMC Socket with high-speed up to 30 MB per second over 8 bit bus and many more pleasant surprises in software. The work has never been easier. Enjoy it!

PRODUCT BENEFITS

Supported repair of a wide list of devices in fully automatic mode or in manual mode.
Your latest android never will be bricked with our box.

UNIVERSALITY

All in one solution supporting eMMC, ISP, JTAG, SPI, NAND, and many more protocols.

PERFORMANCE

All in one solution supporting eMMC, ISP, JTAG, SPI, NAND, and many more protocols.

MULTIBRAND

All in one solution supporting eMMC, ISP, JTAG, SPI, NAND, and many more protocols.

EASY TO USE

All in one solution supporting eMMC, ISP, JTAG, SPI, NAND, and many more protocols.

COMPATIBILITY

All in one solution supporting eMMC, ISP, JTAG, SPI, NAND, and many more protocols.

EQUIPMENT

All in one solution supporting eMMC, ISP, JTAG, SPI, NAND, and many more protocols.

PRODUCT MAIN FEATURES:

  • JTAG BOX, eMMC and JTAG finder in one box, find and repair, forget about broken JTAG pads
  • eMMC Programming Reading Programming and Recovery
  • eMMC Samsung Firmware update, dead eMMC Flash Recovery
  • eMMC programming with vendor firmware
  • eMMC Android file explorer with wide functionality
  • Full range of eMMC reconfiguration up to JEDEC 5.1 Specs
  • SD cards support ( Read, Write, Erase, Lock, Unlock)
  • Ability to run all Z3X software with box (PC/SC-CCID USB Reader onboard)
  • 3rd Party Software Support via open SDK API
  • Latest Android Samsung phones support, no matter how much cores inside
  • LG 3G-Cyon-Show-FOMA phones support, fast recovery after wrong unlocks
  • Wide Anycall phones support repair them in few minutes
  • Latest HTC and Sony Ericsson support, repair, unlock, rebrand them
  • Wide range of other hardware platforms like ZTE HUAWEI AMOI and others

BOX FEATURES

Non-stop fast-growing multifunctional product. The best design for you:

  • One-click device repair
  • Boot repair
  • Data recovery
  • eMMC firmware repair
  • Partition management
  • eMMC service operations
  • SPI memory programming

SOFTWARE

INTENDED PURPOSE AND FEATURES:

EasyJTAG Box is a professional JTAG programmer allowing you to work with devices (single or united into common chain) through JTAG interface. The main intended purpose of EasyJTAG Box is repairing dead boots of the devices (cell phones, PDAs, modems, etc.) or these devices recovery until they become fully operational.EasyJTAG Software is Windows application for EasyJTAG Box providing fast and easy interface for devices recovery.

EASY-JTAG FIRMWARE SUPPORTS FOLLOWING FEATURES AT THE MOMENT:

  • ARM7/ARM9/ARM11 PXA3xx, PXA270, Cortex-A8, OMAP850, Cortex-A9 Dual cores support;
  • Multiple devices on JTAG chain are supported, thus TAP number selection is available;
  • Any custom voltage level selection from range ~1.8V to 3.8V
  • TCK/Adaptive clocking selection
  • Halt core (NRST is not changed)
  • Reset core (NRST is applied before halt)
  • Direct Read and Write memory (by 8/16/32-bit mode or bulk transfers)
  • Access to the control registers of ARM core (coprocessor 15)
  • Program code breakpoints
  • Run Halt Restart core
  • 19 Pins Hardware Accselerated unique finder feature offered only by Easy- JTAG

CURRENTLY SUPPORTED
MEMORY CONTROLLERS ARE:

  • • OneNAND Memory (connected directly to the MCU’s address space);
  • • CFI Compliant NOR Memory with CFI Command sets 0×0001, 0×0002, 0×0200 and 0×0003;
  • • NAND Controller in MSM6250, MSM6250A;
  • • NAND Controller in QSC6055, QSC6085, QSC6240, QSC6270;
  • • NAND Controller in MSM6245, MSM6246, MSM6270, MSM6275, MSM6280, MSM6280A, MSM6281, MSM6290, MSM6800A, MSM6801A;
  • • NAND Controller and OneNAND Controller in MSM7225, MSM7227, MSM7625, MSM7627;
  • • NAND Controller in MSM7200, MSM7200A, MSM7201A, MSM7500, MSM7500A, MSM7501A, MSM7600;
  • • NAND Controller in QSD8250, QSD8650;
  • • eMMC Controller #2 in MSM7230, MSM8255, MSM8255T;
  • • eMMC Controller #0 in S5PC110;
  • • eMMC Controller #0 in S5PC210;

CURRENTLY SUPPORTED CHIPSETS
AND CORES FOR JTAG I/O OPERATIONS:

  • • Generic ARM Cores: ARM7, ARM9 (ARM920, ARM926, ARM946), ARM11, CORTEX-A8,CORTEX-A9;
  • • Qualcomm QSC Family: QSC1100, QSC1110, QSC6010, QSC6020, QSC6030, QSC6055, QSC6085, QSC6240, QSC6270;
  • • Qualcomm MSM Family: MSM6000, MSM6150, MSM6245, MSM6246, MSM6250, MSM6250A, MSM6260, MSM6275, MSM6280, MSM6280A, MSM6281, MSM6800A, MSM6801A, MSM6290, MSM7225, MSM7227, MSM7625, MSM7627, MSM7230, MSM8255, MSM8255T, MSM8260;
  • • Qualcomm QSD Family: QSD8250, QSD8650;
  • • Marvell/XScale Family: PXA270, PXA271, PXA272, PXA310, PXA312, PXA320;
  • • Samsung Processors: S5P6422, S5PV310,S5PC110,S5PC210

SCREENSHOTS

EASY-JTAG PLUS FULL HARDWARE SPECIFICATION:

Box architecture is based on the latest hardware solutions that allow gain, outstanding performance, and stability. You will get unlimited power!

USB 2.0 HIGH SPEED BUFFERED INTERFACE

We use a native USB Stack. Upstream data directly arrives to box MCU without getting slowed by bottleneck technologies like Prolific or FTDI chips.
CDC Stack are give enough performance to match high load applications.

NATIVE USB CCID SMART CARD READER

Security is a very important part of all GSM software projects. We use military standart GEMALTO Security for most our software. The box has a card reader available to software in native way. Box is fully capable with previous Z3X box based on FTDI and Alcor logics. It uses the same card and the same software. Its amazing and you can install your existing security card in box and get perfect 3-in-1 magic solution.

SUPER SPEED XILINX FPGA DRIVEN CORE

Field-programmable gate arrays (FPGAs) are devices that contain programmable logic and interconnects. Incorporating FPGAs into the design of Z3X jtag box ensures that users are able to program or configure boards to erform basic logic gate functions such as AND and/or XOR, as well as a more complex combinational function such as decoders, bus controllers, and pinout searching logic.

RJ45 MULTIPORT UFS3/UNIBOX CAPABLE

The box is equipped with classical RJ45 Unibox connector. You will be surprised You can plug any type of cables like UFS and Unibox, and the box will automatically reconfigure power and data lines align. The box is configured as a standard unibox after powerup, and switches modes after starting corresponding software. Easy and Universal.

INTEGRATED ADC AND DAC FOR VOLTAGE CONTROL

You can flexibly adjust port IO voltage from 1.8 to 30 volt. The box can also measure internal and external voltage with high precision. Easy and Flexible! You can monitor VFEF line of your device in realtime to be sure that all power is on before connection.

INTEGRATED SURGE AND OVERVOLTAGE PROTECTION

Connection errors? Bad cables? What else can break high cost equipment or PC motherboard? We integrated two level power controls and protection subsystems to protect phone, box, and your PC. You can be sure that even if you plug in box ports, everything will soon be protected from disaster. Easy and Safe!

ARM20 INDUSTRY STANDARD JTAG PORT

The 20-pin connector is currently recommended from ARM. You can use different adapters and jigs that are available on the market without soldering or paying for additional converters Connector type: 20-way IDC male leader, 0.1” pitch. Use any 20pin Jtag connectors or jics! Easy and Universal!

SOCKET FEATURES

Combining the top quality materials with the best engineering and elegantly designed hardware for the powerful eMMC Socket.

  • Made from the high-quality materials
  • Over 10K cycles of lifetime performance in your service center
  • Wide range of eMMC IC supported by BGA153/169, BGA162/186, BGA221, BGA529
  • High-speed up to 30 MB per second over the 8-bit bus
  • EMI resistant design, low noise components
  • Integrated power logic. The additional power source is not needed
  • Surge protection – smart fuse driven (0.5A threshold)

SUPPORTS FILES

  • More than 100Gb special files for repair
  • Daily update files
  • Fast download server

WHEN YOU BUY THIS PRODUCT, YOU GET

  • Easy-JTAG Box with activated Z3X smart card
  • Universal testpoints set
  • FREE access to flash file download area at z3x-team.com
  • This product is a result of developers’ own solutions which makes it the most reliable servicing tool on the market

TO START USING OUR PRODUCTS YOU NEED:

  • KEY ACTIVATION CARD WITH Z3X BOX OR Z3X DONGLE
  • WINDOWS-BASED PC*
  • CABLE TO CONNECT YOUR PHONE AND COMPUTER

*Recommended Specifications:
CPU equivalent to Intel 2GHz processor or higher
RAM of 2GB or more
HDD with 1GB of available space
32-64-bit operating system of Windows 7 SP1, Windows 8.1, or Windows 10
Important: Internet access is recommended for product activation and component catalog download.

SUPPORTED MODELS

CHECK YOUR PHONE

STILL HAVE QUESTIONS?

Find more answers on our WIKI and Q&A
team resources

IMPORTANT NOTICE:

All users of Samsung Tool who bough BOX(Or activation) before 20/07/2014 can purchase Samsung to Pro activation
and start to use Samsung Tool Pro.