forum.z3x-team

Samsung Tool, Nec Smart Tool, China Editor, Benq Siemens Tool, LG Tool

entering testmode

Moderators: igorrkko, mk.

Page: 1

Author Post
Member
Registered: May 2010
Posts: 3
hello to all Z3x team.

i have a little question, this is how to enter the testmode to all samsung 2G?
Member
Registered: Mar 2009
Posts: 827
post model
Member
Registered: May 2010
Posts: 3
m120
here logs

Selected model: M120
Selected com port: COM9
Selected speed port: 921600
Phone must be ON!
Please, connect phone
Entering TestMode... Fail - Timeout
Read info - false
Elapsed time: 30 second, sw ver: 3.4.0040


M620
here logs
Last version on support: 2G tools v3.4.0040
Selected model: M620
Selected com port: COM12
Selected speed port: 921600
Phone must be ON!
Please, connect phone
Entering TestMode... Fail
Read info - false
Elapsed time: 14 second, sw ver: 3.4.0030
Member
Registered: Mar 2009
Posts: 827
problem with cable, use E210 UART part or J750 for this phone.
Member
Registered: Aug 2010
Posts: 5
Dear z3x team,My B3310 log here,this phone could not read info please help

Selected model: B3310
Selected com port:
Selected speed port: USB
Phone must be ON!
Please, connect phone
Entering TestMode...
Read info - false
Elapsed time: 3 second, sw ver: 3.4.0066
Member
Registered: Mar 2009
Posts: 827
need install driver for usb
Member
Registered: Aug 2010
Posts: 5
Dear z3x Team,i have flashed my b3310 by usb mode,but now imei is goes to 00000000000.how to repair it?i was try custom,otp,write eep but some problem happening.. logs bellow Please help

Selected model: B3310
Selected com port:
Selected speed port: USB
Start generation to file...
Encode *.s3 - wait... OK
EEP saved to file-> C:\Program Files\Z3X\Samsung\All\B3310_RP4SB68957J_.sre
Phone must be ON!
Please, connect phone
Entering TestMode...
Repair OTP - false
Elapsed time: 3 second, sw ver: 3.4.0066
-------------------------------------------------------------------------------
Selected model: B3310
Selected com port:
Selected speed port: USB
Decode *.s3 file - please wait
segments 1
segment 1 23FE0000 21135 byte
Start USB Flash
Open com port - fail!
Send loaders - fail
Write EEP - false
Elapsed time: 5 second, sw ver: 3.4.0066
-------------------------------------------------------------------------------
Member
Registered: Aug 2010
Posts: 5
Dear z3x Team,i have flashed my b3310 by usb mode,but now imei is goes to 00000000000.how to repair it?i was try custom,otp,write eep but some problem happening.. logs bellow (i allready installed usb driver) please Help

Selected model: B3310
Selected com port:
Selected speed port: USB
Start generation to file...
Encode *.s3 - wait... OK
EEP saved to file-> C:\Program Files\Z3X\Samsung\All\B3310_RP4SB68957J_.sre
Phone must be ON!
Please, connect phone
Entering TestMode...
Repair OTP - false
Elapsed time: 3 second, sw ver: 3.4.0066
-------------------------------------------------------------------------------
Selected model: B3310
Selected com port:
Selected speed port: USB
Decode *.s3 file - please wait
segments 1
segment 1 23FE0000 21135 byte
Start USB Flash
Open com port - fail!
Send loaders - fail
Write EEP - false
Elapsed time: 5 second, sw ver: 3.4.0066
-------------------------------------------------------------------------------
Member
Registered: Mar 2009
Posts: 827
*+connect cable to phone and install driver after.
Member
Registered: Aug 2010
Posts: 5
sir, how to solve imei 0000000000,i was tried *+connect cable but..logs below..

Selected model: B3310
Selected com port: COM11
Selected speed port: USB
Phone must be ON!
Please, connect phone
Entering TestMode... Fail - Timeout
Read info - false
Elapsed time: 33 second, sw ver: 3.4.0066
-------------------------------------------------------------------------------
Is it possible to rebuild imei by usb ca101 cable?or Need RJ 45 cable ?
Member
Registered: Oct 2010
Posts: 2
AlexZ3x wrote
problem with cable, use E210 UART part or J750 for this phone.

alex is right try other cable....j750 its works...100% :)

Page: 1

forum.z3x-team is powered by UseBB 1 Forum Software